Brother HL-2240 and HL-2270DW Drum Counter Reset

Brother HL-2240 and HL-2270DW Drum Counter Reset – This device appears agile and rushed with the support of network connection via wired and wireless. In addition to high print activity, office users also need a printer that has fast performance. Moreover, if used as a network printer, network connections that support absolutely necessary. This is what Brother HL-2270DW is trying to offer. The DW code behind the series signifies the two main features of duplex and wireless.

Two of these features are needed for office users who need print efficiency. In addition to wireless mode, also provided 10/100 ethernet port for wired network connection. With these two types of connections, the Brother HL-2270DW can be used together in a small to a medium-sized office network. To support the smoothness of the connection when used simultaneously, 32 MB of memory is used. In addition to duplex methods for back-and-forth printing, you can also enlarge or downsize on prints like a photocopier, This magnification can be set between 25% to 400% in the configuration section.

Brother HL-2240 and HL-2270DW Drum Counter Reset:

When replacing a new Drum on Brother Printer usually appears the following message: Replace Drum, Drum End Soon, Drum Near End, or Drum Stop. To solve the error message then you must do the way below:

  • Turn OFF the printer before starting reset
  • Open the front cover of the printer.
  • Press and hold GO button and don’t release.
  • Turn on the printer.
  • Wait until the lights come on, and then release “GO” button
  • Press on “GO” again until the error light blinks and release it
  • Next, press “GO” button until all the lights come on solid (except Ready) and then release it
  • Close the front cover of the printer and wait for the printer to warm up and ready.
  • Turn off the printer, and turn on the printer.

For more details, please watch following video:

Note: Do not reset the drum counter unless you are replacing the drum unit. This reset procedure is also suitable for HL-2130, HL-2132, HL-2220, HL-2230, HL-2242D, HL-2250DN, HL-2275DW. Hopefully, the article of Brother HL-2240 and HL-2270DW Drum Counter Reset useful for you. Good Luck!

(Visited 19 times, 1 visits today)

Add a Comment

Your email address will not be published. Required fields are marked *